Honeywell T104F Manuel d'utilisateur télécharger pdf (Page 1)

1 62-3047

C. H. • 12-94 • ©Honeywell Inc. 1994 • Form Number 62-3047

T104F

Thermostatic Control

The T104F Thermostatic Control is used with a V110

Valve Body to control radiators, convectors, baseboard

heating units, or other heating units with standard capacity

requirements. The control is self-powered and requires no

electrical connection. The T100A includes a setpoint dial

and valve actuator, connected by a capillary tube to a sensor.

The T104F Control attaches to the valve body by threaded

connections and may be mounted at any angle. Install the

remote sensor beneath the heating coils in the cold air re-

turn, or on a nearby wall where the air flow is not restricted.

The setpoint dial has reference marks (1-6). The control

has a low limit of 43°F (6°C) when the dial is turned fully

clockwise to the frost protection mark*. The red button

indicates the 68°F (20°C) setpoint limit. Higher settings may

be made by holding in the button while turning. The thermo-

static sensor is protected by a safety spring against tempera-

tures to 125°F (52°C).

M9730

Specifications

MATERIALS OF CONSTRUCTION:

Body: Industrial grade plastics with low thermal

conductivity.

Fastening Ring: Plated brass.

Internal Parts: Brass thermostat capsule, other metals.

TEMPERATURE RANGE: 43° to 79°F (6° to 26 °C).

MAX. SENSOR TEMPERATURE: 125°F (52°C).

MAX. OVERALL DIMENSIONS: 2-1/8 in. (54 mm) wide,

3-5/16 in. (84 mm) long. See Fig. 1.

CAPILLARY LENGTH: 6 ft. 8 in. (2 m).

TEMPERATURE SETTINGS:

These are the setpoint temperatures, which correspond

to the setpoint dial reference marks, under ideal conditions.

Factors affecting the temperature at the sensor vary for each

installation. It may be necessary to adjust the setpoint

higher or lower to obtain the desired space temperature.

Fig. 1—T104F dimensions in in. (mm).

AVAILABLE VALVE BODIES:

See Fig. 2.

Temperature 0 *123456

°F Off 43 46 54 61 68 73 79

°C Off 6 8 12 16 20 23 26

3 5/16

(84)

MAX.

2 1/8 (54)

M9731

1 2 3 4 5 6

Résumé du contenu

Page 1 - Thermostatic Control

1 62-3047C. H. • 12-94 • ©Honeywell Inc. 1994 • Form Number 62-3047T104F Thermostatic ControlThe T104F Thermostatic Control is used with a V110V

Page 2 - Installation

62-3047 2Fig. 2—V110 Valve Bodies.OTHER AVAILABLE T100 THERMOSTATICCONTROLS (See Fig. 3):T104A Control with internal sensor.T104B Control with remote

Page 3 - ADJUSTMENT RANGE SETTING

3 62-3047Fig. 4—Typical installations.M973418 INCHMINIMUMSettings and CalibrationThe T104F Control includes an adjustable range limit-ing pin (order a

Page 4 - ACTUATOR

62-3047 4M9715ADJUSTMENTKNOBEND CAPACTUATOR232. Lift the end cap off the adjustment knob. See Fig. 6.Fig. 6—Lift the end cap off the adjustment knob.3

Page 5 - Troubleshooting

5 62-3047TroubleshootingSympton Possible Cause SolutionAll sections ofthe radiator arenot heating.1. Many radiators are over-sized and allsections are

Page 6 - 62-3047 6

62-3047 6QUALITY IS KEYHoneywell Braukmann Honeywell Braukmann Helping You Control Your WorldHoneywell Inc. Honeywell Limited—Honeywell Limitée1985 Do

Commentaires sur ces manuels

Pas de commentaire

Honeywell T104F Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Supports de câbles Honeywell T104F. Honeywell T104F User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels