Honeywell CT52A Manuel d'utilisateur télécharger pdf (Page 4)

□

For CT5QA'.

Connect each wire from the wall

to either terminal on the back of the

thermostat. Tighten the screws.

□

For CT51A, CT52A;

Connect wires from the wail to

matching terminals on back of thermo

stat. Tighten the screws.

□

For GT53A:

Connect vi/ires to R and W for

7S0 mV systems. Connect to R and Y

for 250 or 500 mV systems. Tighten the

screws.

□

Push excess wire back into wait

and plug hole with nonilammable

insulation to prevent drafts from affecting

thermostat operation.

□

Place a bubble level or plumb line against the ther

mostat to find the level position. Start a screw in

the center of the bottom mounting hole. Move the temper

ature setting lever if necessary to uncover the niounting

hole.

WIRE AND

MOUNT

THERMOSTAT

1 2 3 4 5 6

Pas de commentaire

Honeywell CT52A Manuel d'utilisateur Page 4