Honeywell CT3697 Manuel d'utilisateur télécharger pdf (Page 7)

7 69-1642

STEP 3. MOUNT THERMOSTAT WALLPLATE

❑ Separate the wallplate from the thermostat by placing your thumb or fingers

between the bottom of the wallplate and the thermostat, and pulling the

wallplate up and away from the thermostat. See illustration at right.

❑ Position the wallplate on the wall. Level the wallplate for appearance if desired.

Use a pencil to mark the two mounting holes that best fit the application.

❑ Remove the wallplate from the wall. Drill two 3/16 in. holes in wall (if drywall) as

shown. For materials such as plaster or wood, drill 7/32 in. holes where marked.

Gently, tap the (provided) anchors into the drilled holes until they are flush with

the wall.

❑ Reposition the wallplate over the holes. Pull the wires through the wiring

opening. Loosely insert mounting screws into each of the holes.

❑ Level the wallplate if desired. Thermostat functions properly when not level.

❑ Tighten mounting screws.

M16427

WIRES

THROUGH WALL

WALL

MOUNTING

HOLES

M15044

MOUNTING

SCREWS

WALL

ANCHORS (2)

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Pas de commentaire

Honeywell CT3697 Manuel d'utilisateur Page 7