Honeywell NXL Manuel d'utilisateur télécharger pdf (Page 52)

52(96) Control Keypad Honeywell

HoneywellHoneywell

Honeywell

7.1.2 Control place indications

The symbols I/O term, Keypad and Bus/Comm (see chapter 7.4.3.1) indicate the choice of control

place made in the Keypad control menu (see chapter 7.4.3).

I/O term = I/O terminals are the selected control place; i.e. START/STOP

commands or reference values are given through the I/O terminals.

Keypad = Control keypad is the selected control place; i.e. the motor can be

started or stopped and its reference values altered from the keypad.

Bus/Comm = The frequency converter is controlled through a fieldbus.

7.1.3 Numeric indications

The numeric indications provide the user with information on his present location in the keypad menu

structure as well as with information related to the operation of the drive.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 95 96

Pas de commentaire

Honeywell NXL Manuel d'utilisateur Page 52