Honeywell ENTHALPY SYLK BUS SENSOR C7400S Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS

62-0332-03

E4436

C7400S Enthalpy Sylk Bus Sensor

PRODUCT DESCRIPTION

The C7400S Sylk Bus sensor is a combination temperature

and humidity sensor, which is intended to be used in

commercial roof top units for sensing air. The sensor is

communicates temperature and humidity separately digitally

on the Sylk Bus Communication Protocol.

A separate controller such as the JADE™ Economizer

System (Model W7220) provides power and communications

on the Sylk Bus for the C7400S Sylk Bus sensor.

SPECIFICATIONS

Electrical

Supply Voltage: 7 to 21 Vdc

Power Consumption: 5 mA

Output Rating: 75 ohm load switched at 9600 Baud

Wiring: Sylk Bus: 2-wire (18 to 22 AWG)

Environmental

Operating Temperature range: -40 to 150 °F (-40 to 65 °C)

Storage Temperature range: -40 to 150 °F (-40 to 65 °C)

Shipping Temperature range: -40 to 150 °F (-40 to 65 °C)

Operating Relative Humidity range: 5% to 95% RH non-

condensing

Temperature and Humidity, C7400S:

Temperature sensing range: -40 to 150 °F (-40 to 65 °C)

Humidity sensing range: 0 to 100% RH with 5% accuracy.

Dimensions (See Fig. 1):

Height: 0.8 inches (20.5 mm)

Width: 2.17 inches (55 mm)

Length: 4.25 inches (108 mm)

Weight: 0.58 lb. (0.265 kg)

Listing Agency Approvals:

EN61000-6-3,EN61000-3-2;EN61000-3-3;EN61000-6-1;

EN60730-1 Annex H.23 (emissions)

Annex H.26 (immunity)

CE Mark FOR EU

Fig. 1. Dimensions in inches and (mm) showing mounting

holes.

M32331

4-1/4 (108)

2-1/64 (55)

51/64 (21)

2-3/4 (70)

1 2 3 4

Résumé du contenu

Page 1 - SPECIFICATIONS

INSTALLATION INSTRUCTIONS62-0332-03E4436C7400S Enthalpy Sylk Bus SensorPRODUCT DESCRIPTIONThe C7400S Sylk Bus sensor is a combination temperature and

Page 2 - MOUNTING

C7400S ENTHALPY SYLK BUS SENSOR62-0332—03 2BEFORE INSTALLATIONReview the “Specifications” on page 1 before installing the sensor.When Installing This

Page 3 - TROUBLESHOOTING

C7400S ENTHALPY SYLK BUS SENSOR3 62-0332—03WIRINGAll wiring must comply with applicable electrical codes and ordinances, or as specified on installati

Page 4 - Printed in U.S.A

C7400S ENTHALPY SYLK BUS SENSORAutomation and Control SolutionsHoneywell International Inc.1985 Douglas Drive NorthGolden Valley, MN 55422customer.ho

Commentaires sur ces manuels

Pas de commentaire

Honeywell ENTHALPY SYLK BUS SENSOR C7400S Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Honeywell ENTHALPY SYLK BUS SENSOR C7400S. Honeywell ENTHALPY SYLK BUS SENSOR C7400S User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Honeywell ENTHALPY SYLK BUS SENSOR C7400S