Honeywell RTH111B Guide d'installation télécharger pdf (Page 20)

Advanced Installation Guide

69-2732ES—02 18

About your new thermostat

SETUPWIRINGASSISTANCETROUBLESHOOTING

If labels do not match letters on the thermostat, check

the chart below and connect to terminal as shown here

(see notes, below).

Alternate Wiring

If wires will be connected to both R and Rc

terminals, remove metal jumper (see page 6).

Do not use C or X. Wrap bare end of wire with

electrical tape.

If you have a heat pump without auxiliary/backup

heat connect O or B, not both. If you do not have

a heat pump, do not connect B. Wrap bare end of

wire with electrical tape.

Place a jumper (piece of wire) between Y and W if

you are using a heat pump without auxiliary/backup

heat.

Thermostat does not work on Heat Pumps with auxiliary/

backup heat.

B O G Y

NOT

USED

R Rc

M32734

69-2732ES_A.indd 18 4/19/2012 8:33:45 AM

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Pas de commentaire

Honeywell RTH111B Guide d'installation Page 20