Honeywell RPLS740B Manuel d'utilisateur télécharger pdf (Page 2)

RPLS740B/RPLS741B 2/8

also obtain this information at www.geonames.org or with a Global

Positioning System (GPS) device. The accuracy of the sunset and

sunrise times depends on the accuracy of the coordinates you enter

for your city.

NOTE: Enter a negative value for a south latitude or a west longitude.

5.3.4 Correction Factor (ADJ)

If your city’s time zone is based on political or economic boundaries

instead of its coordinates, your lights might switch on or off too early or

too late with respect to sunrise and sunset. In this case, apply a

correction factor (+1 or -1 hour; refer to addendum). Otherwise, leave

it at 0 (default value).

5.4 Program Menu (Prog)

Use the Program menu to set the programs; i.e. the times you want

the lights to turn On or Off when the switch is in Automatic mode. To

set a program, proceed as follows:

 Select a program number (see section 5.4.1)

 Set the day(s) of the program (see section 5.4.2)

 Set the program start time (see section 5.4.3)

5.4.1 Selecting a program number

You can set up to 7 “On” programs

(“P01 On” to “P07 On”) and 7 “Off”

programs (“P01 Off” to “P07 Off”). For

example, select an “On” program to set

when to turn the lights on; select an

“Off” program to set when to turn the

lights off.

5.4.2 Setting the day(s) of the program

After selecting a program, set the day(s) of the program. You can

select a specific day, all 7 days or “none”. Choose “none” for any

unused program.

5.4.3 Setting the program start time

After setting the day(s) of the program, set its start time. You can

select either a specific time, the sunset time or the sunrise time:

• To select a specific time:

(1) Advance to the hour setting and select the hour.

(2) Advance to the minutes setting and select the minutes.

• To select sunset or sunrise time:

(1) Advance to the hour setting and select the sunset time or

sunrise time. (When you scroll, the sunset time and

sunrise time appear between 11 pm and 12 am.)

(2) To enter an offset (from -70 to +70 minutes in 10-minute

increments) between the sunset or sunrise time and the

program start time, advance to the minutes setting and change

the minutes.

• EXAMPLE: If the sunset time is 6:13 pm and you change the

minutes to display 6:43 pm, you have entered a delay of 30

minutes. If, later in the year, the sunset time is 4:01 pm, the

program will start at 4:31 pm.

• NOTE: When you enter an offset, appears along with

or when you display the sunset or sunrise time. To

remove the offset, display the sunset or sunrise time and

change the minutes until disappears.

5.4.4 Examples

Example 1: The lights turn on at sunset and off at 11:00 pm every day

(default setting).

Example 2: The lights turn on at sunset and off at sunrise every day.

Example 3: The lights turn on at 8:00 pm every day and turn off at

10:00 pm every day except on Saturday night when they turn off at

1:00 am.

Be careful about overlapping!

For example, if you set “P01 Off” at 10:00 pm for all 7 days and set

“P02 Off” to 11:00 pm for Saturday, on Saturday, the lights will turn off

at 10:00 pm, not 11:00 pm since “P01 Off” is set to an earlier time than

“P02 Off”.

To return the switch to its default settings,

simultaneously press both main and left buttons and

hold. The software version will appear for 5 seconds.

RST will appear for the next 5 seconds. Release the

buttons when all segments appear on the screen. The

switch is now reset (see default settings in the menu

flowchart).

Supply: 120 VAC, 60 Hz

Maximum load: 1800 watts

Operating temperature range: -15 °C to 50 °C (5 °F to 122 °F)

Storage temperature range: -40 °C to 60 °C (-40 °F to 140 °F)

Power outage: The screen is blank. Only the time must be set if the

outage lasts more than 4 hours; all other settings and programs are

permanently saved.

Latitude range: from -65° to +65°

Solar table precision: +/- 11 min. (within ±60° latitude)

Certification: UL (c UL us)

Honeywell warrants this product, excluding battery, to be free from

defects in the workmanship or materials, under normal use and ser-

vice, for a period of one (1) year from the date of purchase by the con-

sumer. If at any time during the warranty period the product is

determined to be defective or malfunctions, Honeywell shall repair or

replace it (at Honeywell's option).

If the product is defective,

(i) return it, with a bill of sale or other dated proof of purchase, to

the place from which you purchased it, or

(ii) call Honeywell Customer Care at 1-800-468-1502. Customer

Care will make the determination whether the product should be

returned to the following address: Honeywell Return Goods,

Dock 4 MN10-3860, 1885 Douglas Dr N, Golden Valley, MN

55422, or whether a replacement product can be sent to you.

This warranty does not cover removal or reinstallation costs. This war-

ranty shall not apply if it is shown by Honeywell that the defect or mal-

function was caused by damage which occurred while the product was

in the possession of a consumer.

Honeywell's sole responsibility shall be to repair or replace the product

within the terms stated above. HONEYWELL SHALL NOT BE LIABLE

FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY

INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING,

DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WAR-

RANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF

THIS PRODUCT. Some states do not allow the exclusion or limitation

of incidental or consequential damages, so this limitation may not

apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEY-

WELL MAKES ON THIS PRODUCT. THE DURATION OF ANY

IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS

HEREBY LIMITED TO THE ONE-YEAR DURATION OF THIS WAR-

RANTY. Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may have other

rights which vary from state to state.

If you have any questions concerning this warranty, please write Hon-

eywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN

55422 or call 1-800-468-1502. In Canada, write Retail Products

ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive,

Scarborough, Ontario M1V4Z9.

If you have any questions about your light switch, go to

http://yourhome.honeywell.com, or call Honeywell Customer Care

toll-free at 1-800-468-1502.

Program Days Time Program Days Time

P01 On All 7

days

sunset P01 Off All 7

days

11:00

P02 On to

P07 On

None — P02 Off to

P07 Off

None —

Program Days Time Program Days Time

P01 On All 7

days

sunset P01 Off All 7

days

sunrise

P02 On to

P07 On

None — P02 Off to

P07 Off

None —

“P01 On” “P01 Off”

Program Days Time Program Days Time

P01 On All 7 days 8:00 pm P01 Off Sunday (Su) 10:00 pm

P02 On None — P02 Off Monday (Mo) 10:00 pm

P03 On None — P03 Off Tuesday (Tu) 10:00 pm

P04 On None — P04 Off Wednesday (We) 10:00 pm

P05 On None — P05 Off Thursday (Th) 10:00 pm

P06 On None — P06 Off Friday (Fr) 10:00 pm

P07 On None — P07 Off Sunday (Su) 1:00 am



Reset to default Settings



Troubleshooting

The display is faded

or irregular.

The ambient temperature is either below

or above switch’s operating temperature.

The sunset or sunrise

time is inaccurate.

• The date or time is wrong

(see section 5.2).

• The longitude or latitude is wrong

(see section 5.3.3).

• The correction factor is wrong

(see section 5.3.4).

• You have entered an offset

(see section 5.4.3).



Specifications



Warranty



Customer Assistance

10.

69-2455EFS-01_400-071-003-A (TI071_RPLS740B) USA.book Page 2 Tuesday, May 18, 2010 10:49 AM

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Honeywell RPLS740B Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Honeywell RPLS740B