Honeywell RCA902N Manuel d'utilisateur télécharger pdf (Page 12)

Installation Instructions

69-2157EFS—05 10

Slowly walk across the detection area approximately 15 ft. from the unit. As you cross

a detection zone and your movement is detected a small red indicator behind the

lens will illuminate for a few seconds. Stand still until the indicator goes out after a

few seconds. Continue moving around at various distances and angles to the unit,

stopping each time the indicator illuminates, until you have established the detec-

tion area. If the detector has already been linked to the Switching Receiver or Chime

when the Walk test is performed then the lights will illuminate

for approximately 5 seconds or the Chime will sound each time

movement is detected.

Adjust the position of the detector head to obtain approxi-

mately the desired detection area as required. Angling the

detector head downwards will reduce the range and produce a

smaller coverage area. Angling the head upwards will increase

the range and produce a larger coverage area. If necessary the

detection area can also be reduced by masking the detection

window(seepage13).

Fig.6

M27298

69-2157EFS_C.indd 10 9/22/2008 11:54:01 AM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

Pas de commentaire

Honeywell RCA902N Manuel d'utilisateur Page 12