Honeywell RCA902N Manuel d'utilisateur télécharger pdf (Page 21)

RCA902A

19 69-2157EFS—05

Motion Detector activates Chime at night as well as during the day…

• Theambientleveloflightatthemotiondetectormaybetoohighforthecurrentdusksetting

permanently simulating day-time. At dusk, adjust the dusk control slightly clockwise. Move

around the detection area to see if the movement still activates the Chime. If necessary

continue to adjust the dusk setting until movement does not activate the Chime. In extreme

cases it may be necessary to reposition the detector.

• Themotiondetectormaybeilluminatedbyalightatnightpreventingtheambientlightlevel

falling low enough for the current dusk setting. Try adjusting the dusk setting or shielding the

detector from the light. In extreme case it may be necessary to reposition the detector.

Motion Detector does not activate Switching Receiver and lights at all…

• Checkthatthebatteryinthedetectorisnotexhausted.

• CheckthatthepowertotheReceiverisswitchedON.

• Checkthebulbandreplaceifdefective.Ensurethatthelightbulbiscorrectlyfitted.

• TurnOFFthepowertotheunitandcheckthewiringconnectionsasperthewiringdiagram.

Ensure all connections are correct and terminals are tight. Check the connections at the

switch, detector and Light.

• Checkthatthefuseorcircuitbreakersupplyingthelightingcircuithasnotblownortripped.

Beforereplacingthefuseorresettingthecircuitbreakerbesuretocheckforthecause.

Troubleshooting

69-2157EFS_C.indd 19 9/22/2008 11:54:05 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 79 80

Pas de commentaire

Honeywell RCA902N Manuel d'utilisateur Page 21