Honeywell Genesis 7580 Guide de l'utilisateur télécharger pdf (Page 20)

Installation of Wall Mount Kit 46-00913

1. Drill two #39 pilot holes in the mounting surface. The pilot holes should be

centered vertically 44 mm apart.

2. Position the wall mount over the pilot holes with the arrow pointing up.

3. Secure the wall mount to the wall with the two #7 wood screws () provided

in the kit.

Figure 16

4. Slide the imager's base under the upper corner tabs on the wall mount.

5. Slide the remainder of the base in and down behind the lower corner tabs.

Figure 17

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Pas de commentaire

Honeywell Genesis 7580 Guide de l'utilisateur Page 20