Honeywell Switch MAXPRO-NET Manuel d'utilisateur télécharger pdf (Page 34)

3.6.3 Insert A New Camera Selection

Pressing the key will insert a new selection entry into the scan sequence at the

current entry position. All entries following this position will be shifted up once, to make

room.

The following 3 tables illustrate what happens when camera number 10 is inserted into

entry position (3) of the scan sequence.

Use the

or keys to move to the third entry position of the scan sequence.

Entry position in Scan Sequence 1 2 3 4 5

Camera No. 2 25 29 14 17

Current entry position selected

Table 3.6: Entry Positions In Scan Sequence 20 Before Insertion.

Now, press the

key.

Entry position in Scan Sequence 1 2 3 4 5 6

Camera No. 2 25 29 29 14 17

Current entry position selected

Table 3.7: Entry Positions In Scan Sequence 20 After Pressing The Key.

To replace entry position 3 with camera number 10, press the following keys:

• .. inserts camera number 10 as the third entry of

the scan sequence.

•

Entry position in Scan Sequence 1 2 3 4 5 6

Camera No. 2 25 10 29 14 17

Table 3.8: Inserting Camera No 10 Into Entry Position 3.

Rev. A 3-10 HMXMU001056

03/16/05

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 79 80

Pas de commentaire

Honeywell Switch MAXPRO-NET Manuel d'utilisateur Page 34