Honeywell Switch MAXPRO-NET Manuel d'utilisateur télécharger pdf (Page 36)

3.7 CHANGING THE DWELL PERIOD, CONTINUED

Use the key to move backwards in the scan sequence. Continue pressing the

key until the beginning of the scan sequence list is reached (that is, before Entry

(1)).

Entry position in Scan Sequence 0 1 2 3 4 5

Camera No.

dwell

period

2 25 12 29 14

Current entry position selected

Table 3.10: Using The Key To Move To Entry (0).

The message:

will be displayed briefly, together with the current dwell setting (in seconds). The valid

dwell period is (01 Ù 99) seconds.

Now, enter the new dwell period:

• for example,

.. new Dwell = 15 seconds.

• or

.. new Dwell = 3 seconds.

To start the scan sequence running again, press the

key once. The message:

will be displayed briefly. Scan sequence 20 is now running.

Rev. A 3-12 HMXMU001056

03/16/05

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 79 80

Pas de commentaire

Honeywell Switch MAXPRO-NET Manuel d'utilisateur Page 36