Honeywell MAGICSTAT CT3300 Manuel d'utilisateur

MagicStat® CT3300 Programmable ThermostatInstallation and Programming InstructionsWelcome to the world of comfort and energy savings with your new Hon

10INSTALLATION 69-0654-5M20127JUMPER (FACTORY-INSTALLED). REMOVE IF 5-WIRE SYSTEMRRcWY GFive wires connected to the old thermostatYour new thermostat

69-0654-5 PROGRAMMING11 Programming Faceplate illustration and descriptions Descriptions, continued5 Clear–Cancels the currently displayed program (

12PROGRAMMING 69-0654-5a. Press once.The time is displayed (Fig. 17).b. Press and hold or until the current time is displayed.c. Press again.The

69-0654-5 PROGRAMMING13Programming tips• You do not need to program times and temperatures for all program periods.If you decide not to program your t

14PROGRAMMING 69-0654-5 Step 3. Program the heating schedulea. Write in the times and temperatures that you want to program for your heating schedule.

69-0654-5 PROGRAMMING15 Step 4. Program the cooling schedulea. Write in the times and temperatures that you want to program for your cooling schedule.

16PROGRAMMING 69-0654-5b. Set the System switch to COOL.c. Repeat steps 3c. through 3k. to program the weekday and weekend cooling schedule. Step 5. C

69-0654-5 OPERATION17 Operation Change the clock for Daylight/Standard Timea. Press once.The time is displayed.b. Press and hold or until the cor

18OPERATION 69-0654-5 Replace the batteriesAs the batteries run low, your thermostat shows the following in the digital display:a. Make sure that the

69-0654-5 OPERATION19 Override the program settingsNote: Make sure the System switch is set to either HEAT or COOL before making any changes to the s

2INSTALLATION 69-0654-5 Installation Verify that you have the right thermostatMake sure that the CT3300 is the right thermostat for your heating/cooli

20OPERATION 69-0654-5Check the current programmed temperaturePress to display the temperature that is programmed for the current program period. The

69-0654-5 OPERATION21Check how long heat/air conditioning has been runningTo display the length of time that the heat or air conditioning has been run

22FREQUENTLY ASKED QUESTIONS 69-0654-5 Frequently asked questionsIf... Then...Display will not come on • Make sure the batteries are fresh and install

69-0654-5 FREQUENTLY ASKED QUESTIONS23Customer assistanceFor all questions concerning this thermostat, please read and follow the instructions. If yo

Limited 1-year warrantyHoneywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use

69-0654-5 INSTALLATION3 Step 1. Prepare for installationa. Carefully unpack your new thermostat. Save your receipt and make sure you have the followi

4INSTALLATION 69-0654-5 Step 2. Remove the old thermostatFig. 2Fig. 3Fig. 4a.Turn off power to the heating/cooling system, either at the furnace or at

69-0654-5 INSTALLATION5 Step 3. Install the mounting plateFig. 5Fig. 6Fig. 7a. Separate the mounting plate from the thermostat using a coin, as shown

6INSTALLATION 69-0654-5 Step 4. Set the thermostat for your type of heating systema. Use the FUEL SWITCH on the back of the thermostat to set your new

69-0654-5 INSTALLATION7Heating system tableNote: Setting the screw “out one turn” means turning the screw 360° counter-clockwise, or one complete tur

8INSTALLATION 69-0654-5 Step 6. Mount the thermostat Step 7. Install the batteriesa. Align the tabs at the top of the thermostat with the tabs at the

69-0654-5 INSTALLATION9 Special wiring instructionsA clock thermostat with C or C1 terminalsA clock thermostat has one or two extra wires attached to